ORION HUNGARY schematic diagram service manual circuit diagram wiring schema repair instruction guide user manual free pdf download

 

       
       
       
       

 

 

                                                          Search service manual

   
   
   
ORION HUNGARY 556 TV
ORION HUNGARY 637 TV
ORION HUNGARY 3330 TV
ORION HUNGARY 3331 TV
ORION HUNGARY 4327 TV
ORION HUNGARY 4329 TV
ORION HUNGARY 4331 TV
ORION HUNGARY 5327 TV
ORION HUNGARY AT 4461 KARPATOK TV
ORION HUNGARY CTV 1156 TXT MOR TV
ORION HUNGARY CTV 1167 GALL TV
ORION HUNGARY CTV 1167 TXT GALL TV
ORION HUNGARY CTV 1414 TV
ORION HUNGARY CTV 1556 MOR TV
ORION HUNGARY CTV 1656 HELIOSZ TV
ORION HUNGARY CTV 321 TV
ORION HUNGARY CTV 325 TV
ORION HUNGARY CTV 328 TV
ORION HUNGARY CTV 420 TV
ORION HUNGARY CTV 421 TV
ORION HUNGARY CTV 5521 TV
ORION HUNGARY CTV 5528 TV
ORION HUNGARY CTV 6621 TV
ORION HUNGARY CTV 6628 TV
ORION HUNGARY INFR.2000 SERIES TV
ORION HUNGARY INFRA 01 TEL
ORION HUNGARY INFRA 02 TEL
ORION HUNGARY INFRA 09/I TEL
ORION HUNGARY INFRA 09/II TEL
ORION HUNGARY TS 2630 TV
ORION HUNGARY WT 551 TV

 

     
  ORION HUNGARY schematic diagram service manual circuit diagram wiring schema repair instruction guide user manual free pdf download. Service Handbuch Schaltungen Reparaturanleitung Bedienungsanleitungen kostenlos pdf download. Schéma service manual schéma zapojení schémat oprava návod k obsluze návod k použití free pdf ke stažení. Schéma de principe de service manuel Schéma câblage schéma réparation instruction notice manuel téléchargement gratuit pdf. Diagrama esquemático serviço manual do circuito diagrama de fiação esquema reparação instrução guia manual do usuário livre PDF Download. Schema di servizio manuale circuito schema elettrico schema di riparazione di istruzioni guida manuale pdf gratuito scaricare. schemat instrukcja obsługi Schemat okablowania Schemat naprawa instrukcja instrukcja obsługi free pdf pobierz. şeması servis manuel devre şeması kablolama şeması onarım talimat kılavuzu kullanım kılavuzu ücretsiz pdf indir. Schema service manual schema bedrading schema reparatie gebruiksaanwijzing handleiding gratis pdf te downloaden. schematică diagrame de service manualul de circuit diagrama de conexiuni Schema de reparatii de instructiuni Manual de utilizare pe gratis download pdf.  
     
  CAUTION: Before servicing receivers covered by this service manual and its supplements and addenda, read and follow the SAFETY PRECAUTIONS of this publication. Remember: Safety First.

General Guidance An isolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line.

Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury from electrical shocks. It will also protect the receiver and it's components from being damaged by accidental shorts of the circuitry that may be inadvertently introduced during the service operation.

If any fuse (or Fusible Resistor) in this TV receiver is blown, replace it with the specified.

When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1W), keep the resistor 10mm away from PCB.

Keep wires away from high voltage or high temperature parts.

General Servicing Precautions
1. Always unplug the receiver AC power cord from the AC power
source before;
a. Removing or reinstalling any component, circuit board
module or any other receiver assembly.
b. Disconnecting or reconnecting any receiver electrical plug or
other electrical connection.
c. Connecting a test substitute in parallel with an electrolytic
capacitor in the receiver.
CAUTION: A wrong part substitution or incorrect polarity
installation of electrolytic capacitors may result in an
explosion hazard.
 

2. Test high voltage only by measuring it with an appropriate high
voltage meter or other voltage measuring device (DVM,
FETVOM, etc) equipped with a suitable high voltage probe.
Do not test high voltage by "drawing an arc".
 

3. Do not spray chemicals on or near this receiver or any of its
assemblies.
 

4. Unless specified otherwise in this service manual, clean
electrical contacts only by applying the following mixture to the
contacts with a pipe cleaner, cotton-tipped stick or comparable
non-abrasive applicator; 10% (by volume) Acetone and 90% (by
volume) isopropyl alcohol (90%-99% strength)
CAUTION: This is a flammable mixture.
Unless specified otherwise in this service manual, lubrication of
contacts in not required.
 

5. Do not defeat any plug/socket B+ voltage interlocks with which
receivers covered by this service manual might be equipped.
 

6. Do not apply AC power to this instrument and/or any of its
electrical assemblies unless all solid-state device heat sinks are
correctly installed.
 

7. Always connect the test receiver ground lead to the receiver
chassis ground before connecting the test receiver positive
lead.
Always remove the test receiver ground lead last.
 

8. Use with this receiver only the test fixtures specified in this
service manual.
CAUTION: Do not connect the test fixture ground strap to any
heat sink in this receiver.

 

 

 
Copyright © 2007 Tehnomagazin.com
Terms & Conditions                                        Privacy Policy                                                Impressum